|
Molded Products
Index |
| |
|
Apparatus Bushings -
Universal Air |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
600 AMP AL
Aluminum conductor; air
insulated to IEEE 386
600 amp
elbow/T-body interface
and clamp-on flange. Up
to 25 kV/125 kV BIL. |
DSUAB-01 |
UAB-95
UAB-125 |
 |
600 AMP CU
Copper conductor; air
insulated to IEEE 386
600 amp
elbow/T-body interface
and clamp-on flange. Up
to 25 kV/125 kV BIL. |
DSUAB-02 |
UAB-95C
UAB-95CP
UAB-125C
UAB-125CP |
 |
|
Apparatus Bushings -
Dead Front |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
600 AMP
Air insulated to IEEE 386 600 amp connection.
Bolt on flange. Up to 27kV/125kV BIL. |
DSDFB-01 |
DFB-27
DFB-27C |
 |
1200 AMP
Copper conductor, air insulated to IEEE 386 1200 amp connection.
Bolt on flange. Up to 27kV/125kv BIL |
DSDFB-02 |
DFB-27C-1200
|
|
|
|
Apparatus Bushings -
Wells |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
200 AMP
Copper conductor; air
insulated to IEEE 386
200 amp elbow interface
and clamp-on flange. Up
to 25 kV/125 kV BIL. |
DSUBW-01 |
UBW-95
UBW-125
UBW-125B |
 |
200 AMP with Fuse
Connection
Copper conductor; air
insulated to IEEE 386
200 amp elbow interface
and clamp-on flange.
Also includes a 1/4-20
insert for mounting fuse
clip. Up to 25 kV/125
kV BIL. |
DSUBWF-01 |
UBWF-95
UBWF-125 |
 |
200 AMP
Copper conductor; air
insulated to IEEE 386
200 amp elbow interface
with bolt-on base. Up
to 25 kV/125 kV BIL. |
DSBWE-04 |
SWB-95 |
 |
200 AMP Short Shank
Copper conductor; short
shank oil or gas
insulated toIEEE 386
200 amp elbow interface
and clamp-on style
flange with
undercut for gasket. |
DSBWE-05 |
BWE-125SS |
 |
200 AMP 35kV
Copper conductor; air
insulated to IEEE 386
200 amp elbow interface
with bolt-on base. Up
to 35 kV/150 kV BIL. |
DSHBW-01 |
HBW-150 |
 |
200 AMP CU Well
Copper conductor, air insulated to IEEE 386 200 amp interface.
Up to 27kV/125kV BIL. |
DSDFBW-01 |
DFBW-27
|
 |
RTB-38 Reducing Tap
Bushing
Copper conductor; air
insulated to IEEE 386
LRTP mating
interface and bolt-on
base. Up to 35 kV/150
kV BIL. |
DSRTB-38 |
RTB-38 |
|
|
|
Apparatus Bushings - Low
Voltage |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
600 AMP - Short Shank
Copper or aluminum conductor;
short shank oil or gas insulated
to IEEE 386 600 amp interface,
and clamp-on style flange with
undercut for gasket. |
DSSSB-01 |
SSB-125 |
 |
1800 AMP
Clamp-on style flange mount low
voltage apparatus bushing is
available in various spade and
shank configurations. |
DSLVB18-01 |
LVB18-01
LVB18-02
LVB18-03
LVB18-04
|
 |
3000 AMP
Clamp-on style flange mount low
voltage apparatus bushing is
available in various spade and
shank configurations. |
DSLVB30-01 |
LVB30-01
LVB30-02
LVB30-03 |
LVB30-04
LVB30-05
|
 |
5600 AMP
Clamp-on style flange mount low
voltage apparatus bushing is
available in various spade and
shank configurations. |
DSLVB56-01 |
LVB56-01
LVB56-02
LVB56-03 |
|
|
|
Cable
Accessories |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
600 - AMP Stand Off
Provides non-conducting IEEE 600
amp interface for use
with parking stand. |
DSSTO-01 |
STO-01A |
 |
600-AMP Basic Insulating Plug
Plug
for sealing back end of T-body
or bushing extender. |
DSBIP-01 |
BIP-01 |
 |
600 - AMP Connecting Plug
Copper or aluminum conductor;
IEEE 386 600 amp interface
on both ends for true separable
cable connections. |
DSCP600-01 |
CP600a-A |
 |
600-AMP Reducing Tap Well
Copper conductor; IEEE 386 600
amp interface to 200 amp
interface. |
DSRTW-01 |
RTW-01C |
|
|
|
Insulators - Stand Off |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
Heavy Duty
For
heavy duty mechanical
applications. 4.5-inch
diameter,
6-inch tall, 15 kV/95 kV BIL,
cantilever strength up to 3,500
lbs
upon request. |
DSSOI-05 |
SOI-151-CC
SOI-151-CFA
SOI-151-FFA |
 |
High Creep
For
high creepage requirements.
3.75-inch diameter, up to
6-inch tall, 15 kV/95 kV BIL,
leakage distance up to
12.4-inches. |
DSSOI-04 |
SOI-3751HC-AE
SOI-3760HC-DD
SOI-3760HC-JJ
SOI-3760HC-FF |
 |
Medium Duty
For
medium duty mechanical
applications. 3.6-inch
diameter,
up to 7.5-inch tall, up to 25
kV/110 kV BIL, leakage distance
up
to 16.5-inches. |
DSSOI-01
|
SOI-2260-AA
SOI-2267-AA
SOI-2270-AA
SOI-2260-BB |
SOI-2267-BB
SOI-2270-BB
SOI-2275-EE
|
 |
Medium Duty
For
medium duty mechanical
applications. 3.75-inch
diameter,
up to 11.75-inch tall, up to 35
kV/200 kV BIL, leakage distance
up to 19.2-inches |
DSSOI-03 |
SOI-3735-CC
SOI-3760-CC
SOI-3776-CC |
SOI-3785-CC
SOI-3710-CC
SOI-3712-CC
|
 |
Stand-Off Insulator
2.5-inch diameter, 3.75-inch
tall, 5 kV/70 kV BIL. |
DSSOI-06 |
SOI-2537-AA
SOI-2537-LM |
 |
Stand-Off Insulator
5-inch diameter base, 10.5-inch
tall, 34 kV/150 kV BIL, leakage
distance is 21.3-inches. |
DSSOI-08 |
SOI-6010.5-FKA |
 |
Stand-Off Insulator
3-inch diameter, up to 8-inch
tall, up to 25 kV/150 kV BIL. |
DSSOI-09 |
SOI-3050-NN
SOI-3060-NN
SOI-3070-NN
SOI-3080-NN |
|
|
|
Insulators - Station Post |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
Station Post Insulators
For
higher mechanical and electrical
duty applications. Up to
18-inches tall and 37.7-inch
leakage distance. |
DSSPI-01 |
SPI-6010
SPI-6012
SPI-6014
SPI-6018 |
|
|
|
Insulators - Switch |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
Switch Insulators
For
distribution switch
applications. 4-inch diameter
base,
up to 10-inch tall, up to 35
kV/150 kV BIL. |
DSSWI-01 |
SWI-4007
SWI-4008
SWI-4010 |
 |
Special Switch Insulator
For
distribution switch applications
requiring electrically
connected inserts to prevent
electrical "floating" of
connectors
on a non-conductive frame.
Inserts on each end of the
insulator
are internally connected to
eliminate voltage potential
between connectors. |
DSSWI-4082 |
SWI-4082-EE
SWI-4082EC-FF |
|
|
|
MultiPoint Junctions |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
Multi Point Junction
Compact separable connection
device provides unlimited
options for configuring
distribution circuit with 200
amp and
600 amp IEEE 386 interfaces. |
DSMPJ-01 |
MULTIPLE PARTS AVAILABLE |
|
|
|
Specialty
Molded Products |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
Bus Insulator "Feed Thru"
Provides for energized bus to
pass through barrier. Slot for
bus up to 1-inch thick and up to
4-inch wide. |
DSFTB-01 |
FTB-2502
FTB-2504
FTB-3752
FTB-3754 |
FTB-5003
FTB-5004
FTB-1035
|
 |
Bus Support Assembly - Edge
Insulating bodies are molded
directly onto and through
insulating GP-03 board to
provide maximum electrical
integrity
and eliminate seams in the board
material and potential for
gaps in glue-in style
insulators. |
DSESBA-01 |
ESBA-01
ESBA-04
ESBA-05 |
ESBA-08
ESBA-09
|
 |
Bus Support Assembly - Edge
Insulating bodies are molded
directly onto and through
insulating GP-03 board to
provide maximum electrical
integrity
and eliminate seams in the board
material and potential for
gaps in glue-in style
insulators. |
DSESBA-02 |
ESBA-02
ESBA-10
ESBA-11 |
 |
Bus Support Assembly - Flat
Insulating bodies are molded
directly onto and through
insulating GP-03 board to
provide maximum electrical
integrity
and eliminate seams in the board
material and potential for
gaps in glue-in style
insulators. |
DSFSBA-01 |
FSBA-01
FSBA-03 |
 |
Cable Bushing
Provides for energized cable to
pass through barrier with a hole
diameter of 1 or 1.36-inch. |
DSCB-01 |
CB-100
CB-136 |
 |
Fuse Mount - Clip Style (Single)
Assembly for clip-style fuse
mount up to 15.5 kV/125 kV BIL. |
DSCSFM-01 |
R-FAB1D1
R-FAB1D2
R-FAB1D4 |
 |
Fuse Mount - Hinge Style
(Single)
Assembly for hinge-style fuse
mount up to 15.5 kV/125 kV BIL. |
DSHSFM-01 |
R-FA1D1
R-FA1D2
R-FA1D4 |
 |
Terminal Block
Through-pin conductors molded
into this epoxy block with
o-ring groove provide a means to
pass electrical current through
wall
of an oil-filled instrument
transformer while maintaining
oil-tight integrity of can. |
DSTBL-01 |
ITTB-3
ITTB-4
ITTB-5
ITTB-6 |
|
|
|
Traction
Power Index |
|
Graphic |
Description |
Data Sheet |
Part Numbers |
 |
Automatic Grounding
Switch Relay
The ETS Supervisory
Relay is normally used
to provide
an output from remote
shorting of a wire. |
Reuel 132-PB-0305-01 |
0305 |
 |
Battery Charger (DC to
DC)
The
Reuel DC to DC battery
Charger has been
designed
to provide an alternate
battery charging system. |
Reuel 132-PB-0042-02 |
0047 |
|
N/A |
Bus Duct (AC & DC)
Bus Duct for Transit
Applications. |
Reuel 132-PB-0048-03 |
N/A |
 |
Catenary Voltage Monitor
The Catenary Voltage
Monitoring Assembly has
been
developed for usage. |
Catenary Voltage Monitor |
0462 |
 |
Catenary Voltage Monitor
Relay
The Catenary Voltage
Monitoring Assembly has
been
developed for usage
where operation. |
132-PB-0057-02 |
400-00-0002-00 |
 |
EMC DC Circuit Breakers
The family of EMC DC
Circuit Breakers is the
broadest
and most technologically
advanced line. |
Reuel 132-PB-0043-02 |
N/A |
 |
ETS Supervisory Relay
The ETS Supervisory
Relay is normally used
to provide
an output from remote
shorting. |
Reuel 132-PB-0600-03 |
0600 |
 |
Ground Voltage Monitor
System
GVMon continuously scans
a real-time analog input
that indicates the
ground-to-negative. |
Ground Voltage Monitor
System |
400-00-0020-00 |
 |
High Resistance Ground
Relay
Type 64 Ground Structure
Relays from Reuel, are
dual-function protective
devices designed to
protect
equipment. |
High Resistance Ground
Relay |
24Vdc: 0162
48Vdc: 0095
125Vdc: 0051 |
|
N/A |
Junction/Splice Box
Enclosures
Custom Junction / Splice
Box Enclosures for Power
and
Control Applications. |
Reuel 132-PB-0046-02 |
N/A |
|
N/A |
Motor Operated Load
Break Disconnect
Switches
Motor Operated Load
Break Disconnect
Switches for
Overhead Contact
Systems. |
Reuel 132-PB-0047-02 |
N/A |
|
N/A |
Negative Bus
Auto-Grounding System
Negative Bus
Auto-Grounding System. |
Negative Bus Auto
Grounding System |
N/A |
 |
Reverse Current Relay
The reverse current
relay designed by Reuel,
protects the
rectifiers and DC
cathode breakers.. |
Reuel 132-PB-0059-02 |
24Vdc: 0077-24
48Vdc: 0077-48
125Vdc: 0077-125 |
 |
Series 90 Isolators
High performance, solid
state, Series 90
Isolators were
developed by Reuel to
isolate meters. |
Reuel Isolators |
Voltage: 0174
Current: 0176
Power: 0175 |
 |
Siding Options for
Custom Power Control
Centers
Custom Power Control
Centers: Brick Vinyl
Siding. |
Reuel 132-PB-0052-03 |
N/A |
 |
Surge Arrester (DC)
The Reuel IMP-1 Metal
Oxide DC Surge Arresters
provide
surge protection for DC
distribution systems. |
Reuel 132-PB-0580-11 |
1000Vdc: 0580
1300Vdc: 0728
2000Vdc: 0582 |
 |
Reuel 132-PB-0049-02
Traction Substation
Maintenance Training. |
Reuel 132-PB-0049-02 |
N/A |
 |
Reuel Transfer Trip Kit
The Reuel, Transfer Trip
Kit is designed to trip
a DC feeder
breaker by a signal from
a remote source. |
Reuel Transfer TripKit |
0091 |
 |
Type 27-59 DC Under-Over
Voltage Monitor Relay
The system consists of a
sending unit and an
adjustable
relay unit. |
Reuel 132 PB 0041 02 |
48Vdc: 0098
125Vdc: 0041
125Vdc LV: 0048 |
 |
Type 64 Low Resistance
Ground Structure Relay
The 64 Low Resistance
Ground Structure Relay
from Reuel,
is designed to protect
equipment enclosures. |
Reuel Type 64 |
24Vdc: 0104
125Vdc: 0097 |
 |
Reuel 76 Overcurrent
Relay
Type 76 Overcurrent
Relays from Reuel,
provide maximum
protection for trolley
wires, third rails. |
132-PB-0050 Reuel 76 Overcurrent
Relay |
24Vdc: 0088
48Vdc: 0094
125Vdc: 0050 |
|
|
Type 76 Overcurrent
Relay Instruction Manual
Type 76 DC Overcurrent
Detector Instruction
Manual. |
Reuel 76DC Instruction
Manual |
N/A |
 |
Type 82-83 DC Breaker
Recloser
The Type 82-83 DC
Breaker Recloser is a
solid-state,
fiberoptic reclosing
system. |
Reuel 132-PB-0044-02 |
HV: 0002
24Vdc LV: 0032
48Vdc LV: 0096
125Vdc LV: 0031 |
|
|
Type 82-83 DC Breaker
Recloser-Instruction
Manual
DC Automatic Reclosing
System Instruction
Manual. |
Reuel 132-IM-0002-05 |
N/A |
 |
Type 129 Load Measuring
Relay
The Type 129 Relay and
Load Measuring Resistor
(LMR)
provides a
test current for a load
measuring system. |
Reuel 129 Device |
24Vdc: 0033
48Vdc: 0037
125Vdc: 0001 |
 |
Type IMP-151D AC
Ground-Fault Relay
The Reuel IMP-151D AC
Ground Fault Relay is
designed
to be used in grounded
AC power. |
Reuel 132-PB-0151-02 |
0116 |
 |
Voltage Suppressor
The Voltage Suppressor
is designed and intended
for use with catenary
resistor PN0599. |
Reuel 132-PB-0593-03 |
0593 |
|
N/A |
Wayside Disconnect
Switches
Wayside Disconnect
Switches for Transit
Applications. |
Reuel 132-PB-0045-02 |
N/A |
|
|
|
IMProCon |
 |
IMProCon Manual
Instruction Manual for IMProCon
Traction Power Substation
Control System. |
IMProCon Manual |
N/A |
|
|
IMProCon System Manual
Instruction Manual for
IMProCon Traction Power
Substation
Control System. |
Reuel IMProCon |
N/A |
 |
Reuel IMProCon
Switchgear Guide 27kV
27kV Metal-Clad
Switchgear Specification
Guide, Vacuum
Circuit Breaker Type
3AH3. |
Reuel Switchgear Guide |
N/A |
|
N/A |
IMProCon AC Module (ACM)
The Reuel IMProCon AC
Module (IMProCon - ACM). |
Reuel 132-PB-0055-02 |
0490-1 |
|
N/A |
IMProCon DC Module (DCM)
The Reuel IMProCon DC
Module (IMProCon - DCM). |
Reuel 132-PB-0054-02 |
0489-1 |
|
N/A |
IMProCon Feeder Control
Module (FCM)
The Reuel IMProCon
Feeder-Controller Module
(IMProCon - FCM). |
Reuel 132-PB-0053-02 |
0487-1 |
|
N/A |
Substation Master Module
(SMM)
The Reuel IMProCon
Substation Master Module
(IMProCon - SMM). |
Reuel 132-PB-0056-02 |
0488-1 |
|
N/A |
IMProCon Transducer
The IMProCon Transducer
designed by Reuel
provides
accurate, real time
digitized sampling. |
Reuel 132-PB-0060-01 |
0499
400-00-0056-00 |
|
|
|
